Table of Contents
Advertisement
to drain completely.
ECM00710
CAUTION:
Inspect the used oil after it has been
drained. If the oil is milky, water is getting
into the gear case which can cause gear
damage. Consult a Yamaha dealer for re-
pair of the lower unit seals.
NOTE:
For disposal of used oil consult your Yamaha
dealer.
5.
With the outboard motor in a vertical po-
sition, and using a flexible or pressur-
ized filling device, inject the gear oil into
the gear oil drain screw hole.
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
LZ150TR 870.0 cm
(30.68 Imp.oz)
LZ200TR 870.0 cm
(30.68 Imp.oz)
Z150TR 980.0 cm
(34.56 Imp.oz)
Z175TR 980.0 cm
(34.56 Imp.oz)
Z200TR 980.0 cm
(34.56 Imp.oz)
3
(29.41 US oz)
3
(29.41 US oz)
3
(33.13 US oz)
3
(33.13 US oz)
3
(33.13 US oz)
ZMU01900
6.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7.
Insert and tighten the gear oil drain
screw.
EMU29312
Inspecting and replacing anode(s)
Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
ECM00720
CAUTION:
Do not paint anodes, as this would render
them ineffective.
NOTE:
Inspect ground leads attached to external
anodes on equipped models. Consult a
Yamaha dealer for inspection and replace-
ment of internal anodes attached to the pow-
er unit.
Maintenance
ZMU01901
64
Advertisement
Table of Contents
