Makita CL115FD Instruction Manual page 12

CAUTION:
Putting the cleaner against the
wall without any other support may create a risk
of injury or damage to the appliance.
Fig.37
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
Fig.38
► 1. Wall mount for cordless cleaner 2. Plug
CAUTION:
Do not hang the cleaner to the wall
mount violently or hang other appliances than the
cleaner.
NOTE: When you don't charge the cleaner, the plug
can be stored on the wall mount for cordless cleaner
as illustrated.
1
2
Cleaning
Cleaner body
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/paper filter
mounting area and the dust stopper.
Fig.39
Dust stopper
Wipe dust off from the dust stopper.
Remove dust and dirt on the sponge part by lightly tapping it.
Fig.40
► 1. Sponge part
Dust bag
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes weak. Dry it
out thoroughly before use. An insufficiently dried bag
may cause poor suction and shorten the service life of
the motor.
Fig.41
12 ENGLISH
1