Troubleshooting - Black & Decker HM6000-B5 Manual

3. Rinse the soft cloth in warm water below 40ºC and wipe
off the stains on the machine surface. Do not use wire
balls or nylon rags to avoid surface scratch and damage.
4. Do not use diluent, toluene, acid detergent, lamp oil,
alcohol or chemical wipe cloth to avoid discoloration,
deterioration or silk print pattern damage, affecting the
beauty.
● The appliance must be placed upright on
flat and sturdy surface else it may turn over
and fall and result in electric shock or fire.
● Please do not use other power rating except
marked on rating label, or it may lead to electric
shock or fire.
● When the appliance is working, do keep it away
from socket.
● Do plug off before cleaning or not in use for a long
time.
● This appliance is for household use only.
Problem
Indicators do not light on.
Mist does come out
Smelly mist
Red light is always on
Tips during cleaning

Troubleshooting

Analysis
Power cord is not plugged in
properly.
Water in Water Tank or on the
Base is dirty.
Float off.
(Original instructions)
5. When wiping the dirt on the power line, please use a dry
soft cloth to wipe it.
6. When the machine is not used for a long time, after
cleaning and drying, the parts must be packed into the
packing box in the original packing order and stored in a
dry place.
● Do not plug on / off with wet hands.
● Please do not use power socket which is not in
good condition.
● This appliance shall not be used by children. Keep
the appliance and its cord out of reach of children.
● The appliance can be only disassembled, repaired
by qualified technician. Otherwise it may lead to
electric shock or fire.
● Any damage on wire or power cord, please send
the appliance to factory or service center and have
professional technician to amend it.
Troubleshooting
Plug in the power cord firmly.
Clean the Base and Water Tank. Fill in clean
water. Use clean water.
The float should be installed according to the
instructions.
ENGLISH
7