Sending Document(S) From A Pc To A G3 Fax Machine - Panasonic 3000 Operating Instructions Manual

NETWORK FEATURE
Relayed Transmission

Sending Document(s) from a PC to a G3 Fax Machine

Using your email application, you can send any document(s) from your PC as a TIFF-F attachment to one or
multiple G3 fax machines automatically through the Internet Relay Station.
The Internet Relay Station (DP-2500/3000) must be properly setup with all the required parameters.
To send a Relayed Transmission from your PC using your email application, follow the example below.
Ex: In the "To:" box of your email application, type the following:
sg-rly#81331111234@singapore.panasonic.co.sg
or
sg-rly#*001@singapore.panasonic.co.sg
• Relay XMT Password:
• # + End Receiving Station (with Phone Number):
• # *+ End Receiving Station (with Phone Book Number):
• # *+ End Receiving Station (with Program Key as a Group Dialing):
• @ + Relay Station's Domain Name:
Your PC sends the text document(s) to the Relay email address of the Relay Station with the telephone
number of the End Receiving Station.
After the Relay Station completes its transmission to the End Receiving Station(s), your PC receives a COMM.
Journal from the Relay Station. This Journal confirms whether the Internet Relayed Transmission was
successful.
(see Note 1) (see Note 2)
NOTE
1. The "#" and "*" symbol must be entered after the Relay XMT Password as it indicates to the DP-2500/3000 that
a phone number for the End Receiving Station will follow.
2. If the Relay Station requires a special access number to get an outside line, enter that access number first then
enter a hyphen (represented by a "-") before entering the full number.
112
sg-rly
#81331111234 (see Note 1)
#*000-#*199 (see Note 1)
#*2001 - #*2012 (see Note 1)
@singapore.panasonic.co.sg