Honeywell POSI3 USB Quick Start Manual page 9

3. Enter the user's information (as needed). The
User ID field and the Password field must be
completed.
4. Set the Permissions level to 4.
5. Click the Check button to save the information.
6. Click the Log on button at the lower left, and log on
with the User ID and password of the user you just
created.
Adding SCBA Models
Note: This step is only necessary in Standard Version
Posi3 USB software. Brand-specific versions of software
come with pre-installed models and do not allow end
users to configure models.
1. Click the menu item Setup / Apparatus / Add New
Model.
POSI3 USB Quick Start Guide
Page
2. Click "New" to enter the Model Configuration window
3. Enter the Manufacturer and Model
4. Select the supply pressure of the cylinder (2216 PSI,
3000 PSI or 4500 PSI)
5. Select the type of apparatus (SCBA, Airline
Apparatus, SCBA/Airline or Facepiece)
6. Click "Next" to start selecting the components of the
model
7. You will be prompted to select a first stage. Double-
click or drag and drop a component from the left pane
so that it appears in the right pane.
9
of 11
P/N 13-395 11/4/20 Rev.05