Makita UH5580 Instruction Manual page 6

3
► 1 . Hook complete 2. Extension cord 3. Tool's cord
When engaging the extension cord, secure it to the
tool's cord with the hook complete. Attach the hook
about 100 - 200 mm from the extension cord connector.
This will help prevent unintentional disconnection.
Waist cord hook
CAUTION:
• Do not attach the holder of waist cord hook to
other than the extension cord. Do not attach it
in a position closer to the tool beyond the hook
complete. Failure to do so may cause an acci-
dent or personal injury.
• Attach firmly one hook of the hook complete to
the tool's cord and the other hook of hook com-
plete to the extension cord. Working with the
tool with a sole hook only attached may cause
an accident and injury.
Using the waist cord hook helps to minimizing a risk of
cutting off the extension cord unexpectedly caused by
the loose extension cord.
1
7
► 1 . Hook 2. Tool 3. Tool's cord 4. Hook complete
5. Extension cord 6. Holder 7. Waist cord hook
1
2
2
3
4
5
6
Press in or pull out the cord through the opening of the
holder.
► 1 . Holder 2. Cord
CAUTION:
• Do not force the opening of the holder. Failure to
do so may cause deflection and damage to it.
Arm cord hook (Accessory)
CAUTION:
• Do not attach the holder of arm cord hook to
other than the extension cord. Do not attach it
in a position closer to the tool beyond the hook
complete hooks. Failure to do so may cause an
accident or personal injury.
• Attach firmly one hook of the hook complete to
the tool's cord and the other hook of hook com-
plete to the extension cord. Working with the
tool with a sole hook only attached may cause
an accident and injury.
Using the arm cord hook helps to minimize a risk of
cutting off the extension cord unexpectedly caused by
the loose extension cord.
1
► 1 . Holder 2. Arm cord hook
Attach firmly the arm cord hook placing around your
arm and pass the extension cord through the holder.
The length of the arm cord hook band is adjustable.
6 ENGLISH
1
2
2