ASSEMBLY
CAUTION:
Always be sure that the tool is
drill bit
Optional accessory
1. Sleeve 2. Close 3. Open
counterclockwise.
1. Groove 2. Hook 3. Screw
the hook, insert it into a groove in the tool housing on
loosen the screw and then take it out.
Optional accessory
1.
on either right or left side and secure it with a screw.
OPERATION
CAUTION:
all the way until it locks in place. If you can see the
locked completely. Insert it fully until the red indicator
you.
CAUTION:
When the speed comes down
control the twisting action.
2.
CAUTION:
CAUTION:
Make sure that the driver bit is
First, turn the action mode changing ring so that the
sure to the tool. Start the tool slowly and then increase the speed
gradually. Release the switch trigger as soon as the clutch cuts in.
NOTE: When driving wood screw, pre-drill a pilot hole
and prevents splitting of the workpiece.
CAUTION:
There is a tremendous and sudden
First, turn the action mode changing ring so that the arrow
then pull the switch trigger. Do not force the tool. Light
and prevent it from slipping away from the hole.
clogged with chips or particles. Instead, run the tool at
Blow-out bulb
Optional accessory
1.
dust out of the hole.
the
hole, make an indentation with a center-punch and
9 ENGLISH
marking.
-
-