Functional Description; Switch Action; Battery Protection System - Makita DHP482 Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
CAUTION:
Always switch off the tool before
CAUTION:
Hold the tool and the battery car-
1. Red indicator 2. Button 3. Battery cartridge
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
CAUTION:
fully until the red indicator cannot be seen. If not,
you or someone around you.
CAUTION:
forcibly. If the cartridge does not slide in easily, it is

Battery protection system

Lithium-ion battery with star marking
1. Star marking
Overloaded:
In this situation, turn the tool off and stop the application
the tool on to restart.
on again.
will not operate. In this situation, remove and recharge
capacity
Only for battery cartridges with "B" at the end of the
model number
1. Indicator lamps 2.
light up for few seconds.
Indicator lamps
NOTE: Depending on the conditions of use and the
from the actual capacity.

Switch action

1. Switch trigger
CAUTION:
the "OFF" position when released.
trigger. Release the switch trigger to stop.
1. Lamp
CAUTION:
trigger.
NOTE: Use a dry cloth to wipe the dirt off the lens of
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
7 ENGLISH
Off
malfunctioned.
-
capacity
Charge the
may have
-