Answering System Display Messages; Troubleshooting Guide; Caller Id Solutions - GE 28223EE1 User Manual

Answering System Display Messages

The following messages show the status of the answering system or
help you set up and use the system.
0-59
CL (blinking)
- -
IN (blinking)
F (blinking)
Six bars (blinking)
announcement.
LA (Line Access)
An (blinking)

Troubleshooting Guide

Caller ID Solutions

No Display
• The battery must be fully charged. Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical
outlet. Disconnect the unit from the wall and plug it in again.
• You must be subscribed to Caller ID service from your local telephone
company in order to receive Caller ID records.
Caller ID Error Message
• This message indicates either the presence of noise on the line, or that
an invalid message has been sent from the telephone company.
Indicates the total number of messages.
The voice time/day stamp needs to be set.
Answering system is turned off.
The system is answering a call.
Answering system memory is full.
The system is recording a memo or an
External line remote answering system.
Answering system is in announcement only
mode.
57