Message Alert; Security Code - GE 28223EE1 User Manual

Message Alert

This feature sets your answering system to give an alert tone every
10 seconds when there are new messages.
From the Answerer Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the
MESSAGE ALERT sub-menu.
. Press mute/menu OK button to enter the menu. The screen
displays ON OFF.
. Use the caller ID-volume (5 or 6) button to scroll to ON or OFF.
The default setting is OFF.
. Press the mute/menu OK button to confirm. You will hear a
confirmation tone and the screen displays the new setting.

Security Code

You can access the answering system from a tone dialing telephone
in another (remote) location. The security code is required for remote
access, and it prevents unauthorized access to your answering
system.
From the Answerer Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the
SECURITY CODE sub-menu.
. Press mute/menu OK button to enter the menu. The screen
displays SECURITY CODE 1 2 3.
. Use the touch-tone pad to enter your new -digit security code.
The default setting is 123.
. Press the mute/menu OK button to confirm. You will hear a
confirmation tone and the screen displays the new security code.
NOTE: If you make a mistake, use the delete/int/conf button
to delete the security code and begin again.
16