Sequence - GE 28223EE1 User Manual

. Use the touch-tone pad to enter a name (up to 1 characters).
More than one letter is stored in each of the number keys. For
example, to enter Bill Smith, press the key twice for the letter B.
Press the key times for the letter I. Press the 5 key times for the
letter L. Press the 5 key times for the second letter L, and press the
1 key to insert a space between the first and last name. Press the 7
key times for the letter S; press the 6 key once for the letter M; press
the key times for the letter I; press the 8 key for the letter T; press
the key twice for the letter H.
NOTE: If you make a mistake press the delete/int/conf
button to backspace and erase the wrong character(s) or
number(s).
. Press the mute/menu OK button again to save your selection.
The screen displays ENTER NUMBER.
5. Use the touch-tone pad to enter the telephone number (up to
0 digits, including pauses), and press the mute/menu button to
confirm and advance SET MELODY sub-menu.
6. Use the caller ID-volume (5 or 6) button to select from melody
01 to melody 10 (a testing tone is generated while making melody
selection).
7. Press mute/menu OK button to confirm, the records are stored
alphabetically in the phone book.
Inserting a Pause in the Dialing Sequence (of a
Stored Number)
Press the #pause/ringer button on the handset's touch-tone pad to
insert a delay in dialing sequence when a pause is needed to wait for
a dial tone (for example, after you dial 9 for an outside line, or to wait
for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
5