Speaker Volume; Voice Instruction; Recording The Outgoing Announcement - GE 28223EE1 User Manual

Speaker Volume

Use the volume (5 or 6) buttons to adjust speaker volume on the
base to a comfortable level. L1 is the minimum speaker volume and
L8 is the maximum.

Voice Instruction

If you need additional assistance, press the repeat button in standby
mode and follow the voice instructions.

Recording the Outgoing Announcement

For best results when recording, you should be about nine inches
from the microphone, and eliminate as much background noise as
possible.
You may record an outgoing announcement for the current
answerer mode or choose the default for your current outgoing
announcement.
1. Make sure the answering system is ON.
. Press and hold the announce button until the speaker announces
"RECORD ANNOUNCEMENT FOR RECORD MESSAGES MODE
AFTER THE TONE ".
. Begin speaking after you hear the beep.
. Release the button when you finish your announcement.
NOTE: If you choose not to record an outgoing
announcement, a default announcement plays instead.
To return to the default announcement after you have
recorded your own outgoing announcement, press and
hold the announce button and release it when you hear the
beep. Or, press the delete button while the announcement
is reviewing.
17