Registration - GE 28223EE1 User Manual

Registration

Your packaged handset(s) are pre-registered and ready to use. It
is not recommended that a handset be registered again unless
absolutely necessary.
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the
REGISTRATION sub-menu.
. Press the mute/menu OK button to enter the menu. The screen
displays YES4NO. The default setting is NO.
. Use the caller ID-volume (5 or 6) button to scroll to YES or NO.
. If you select YES, press the mute/menu OK button. The screen
displays HOLD BASE FIND FOR 5 SECONDS, THEN PRESS MENU
OK KEY. (Your handset should be held near the base during
registration process.)
5. Press and hold the find button on the base unit, the charge/in
use indicator flashes. Press the handset mute/menu OK button.
The screen displays REGISTERING, then the screen displays.
REGISTERED. You may now rename your handset. (Refer to Step
& of Handset Name Section)
NOTE: If you are re-registering the handset through the
handset menu; to rename your handset you must go to the
Handset Name Section and start from the beginning step.
6