Connecting The Belt Clip; Display Messages; Headset And Belt Clip Operation - GE 25881EE3 User Manual

Headset and Belt Clip Operation

Connecting an Optional Headset to the Handset
For hands free conversation, connect the headset (optional) to the HEADSET jack as
shown. The handset receiver and microphone are disabled when the headset is
connected.
Adjust the headset to rest comfortably on top of your head and over your ear. Move
the microphone to approximately  to 3 inches from your mouth.
• Press the talk/end/call back button to answer or place a call before using the
headset.

Connecting the Belt Clip

There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the
ends of the belt clip into place.

Display Messages

The following indicators show the status of a message or of the unit.
ANSWERER REMOTE/ Indicates the answering system is being accessed remotely.
ANSWERER REMOTE
ACCESS
BLOCKED NUMBER
DELETE?
DELETE ALL?
DELETE CALL ID?
END OF LIST
The person is calling from a number that has been blocked
from transmission.
Prompt asking if you want to erase one of the 10 numbers
stored in the phone's outgoing memory.
Prompt asking if you want to erase all Caller ID records.
Prompt asking if you want to erase the current Caller ID record
that is shown on the display.
Indicates that there is no additional information in Caller ID
memory.
39