Andset; Default Setting; Basic Operation; Answering A Call - GE 25881EE3 User Manual

3. Press program/flash on the base to confirm handset is linked to the base. WAITING
HANDSET REGISTRATION shows in the display.
4. Press the flash/prog button on the handset until LINK BASE? shows in the display.
NO is the default setting.
5. Press caller ID/vol (- or +) button on the handset to scroll to YES.
6. Press flash/prog on the handset again to confirm. You will hear a long confirmation
tone when the handset is successfully linked to the base.

Default Setting

NOTE: This setting may be made with the base or the cordless
handset.
1. Press the program/flash button on base or flash/prog button on handset until
DEFAULT SETTING or DEFAULT shows in the display. NO is the default setting.
. Use the touch-tone pad to select 1YES or 2NO, or press the caller id (- or +) button
on the base or caller ID/vol (- or +) button on the handset to scroll to YES or NO.
NOTE: If you choose YES all settings in the programmable menu
return to factory defaults except day and time.
3. Press the program/flash button on base or flash/prog button on handset again to
store your selection.

Basic Operation

Answering a Call

Check the display to see who is calling.
NOTE: You can only use one handset at a time. UNAVAILABLE will be
displayed if other handset is in use.
Cordless Handset
1. Press the talk/end/call back button on the handset.
. When finished, press talk/end/call back or place the handset in charging cradle to
hang up.
19