Storing A Redial Number; Inserting A Pause In The Dialing Sequence; Reviewing, Changing Or Deleting Stored - GE 25881EE3 User Manual

Storing a Redial Number

1. Make sure the phone is OFF (not in TALK mode).
. Repeat step 1 through 6 in Storing a Name and Number in Memory.
3. Press redial to display the redial number and name.
4. Press memory or mem/conf again to confirm.
NOTE : If the number you want to redial has more than 24 digits,
the telephone number cannot be stored in memory.

Inserting a Pause in the Dialing Sequence

Press the #pause button on the touch-tone pad to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a dial tone
(for example, after you dial 9 for an outside line, or wait for a computer access tone.)
Each pause counts as 1 digit in the dialing sequence.

Reviewing, Changing or Deleting Stored

Names/Numbers
To Review: Press mem/conf button on the handset or memory button on base,
then press the caller id (- or +) button (on base) or the caller ID/vol (- or +) button (on
cordless handset) to scroll through the stored numbers. Or press the memory location
number.
To Change: Follow the steps under Storing a Name and Number in Memory except
replace the stored name or number with the new information.
To Delete: Press mem/conf button on the handset or memory button on base, then
press the caller id (- or +) button (on base) or the caller ID/vol (- or +) button (on
cordless handset) to scroll to a desired memory.
1. While the entry displays, press delete button on base or del/chan button on
handset to mark the entry for deletion. The display shows DELETE?
. Press delete button on base or del/chan button on handset again to delete the
entry. **DELETED** is displayed.
9