Remote Access; Using The Handset; Memory Full; Answering System Indicator - GE 25881EE3 User Manual

Remote Access

This section explains two types of remote access: using the cordless handset to access
the answering system and accessing the answering system from another phone.
You may access the answering system on the base with the handset buttons.
You may also access your answering system from any touch-tone phone by entering
a 3-digit security code after you hear the outgoing announcement. A voice menu
system guides you through the steps.

Using the Handset

Press the format/answerer button to access the answering system.
After you access the answering system, use the marked handset keys just as if
you were pressing the corresponding buttons on the base (see "Answering System
Operation" for details on functions). To make it easy for you, the functions are listed
on the handset above each number. For example, to play messages:
1. Press the format/answerer button.
. Press the  key (play/stop) and mailbox number.
3. When you are finished listening to your messages, press format/answerer again to
quit, or you may listen to the voice menu at any time by pressing 7.

Answering System Indicator

The answering system is active by default. The display will show ANSWERER OFF
when the answering system is turned off.

Memory Full

When the answering system's memory is full, the system answers after 10 rings,
beeps, and waits for you to enter the 3-digit security code. You have 10 seconds to
enter the security code before the phone hangs up.
You should erase some of the messages in order for the system to record
incoming messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To
access the answering system, enter your 3-digit security code after
you hear the beep.
36