Cable End Electrical Assemblies And Precision Measurement Processor - Honeywell Precision Platform 4022 Series System Manual

6. Cable End Electrical Assemblies and
Precision Measurement Processor
p/n 6510020208
The Cable End electrical assemblies serve as the interface between the
scanner and the Quality Control System. The 4022-31 and 4022-40
scanners also require a Precision Measurement Processor (PMP) with
integral Measurement Sub System (MSS). The 4022-30 scanner is designed
to interface directly to existing MXOpen systems and does not require a
PMP.
This chapter provides a description of the Cable End electrical assemblies
as well as the electronic components of the 4604-02 PMP used with the
4022-31 and 4022-40 scanners. The PMP is located remotely from the
scanner in a wall-mounted enclosure. See Chapter 7 for more information
on the 4022-40.
For detailed descriptions and schematics of the electronic circuit boards
used in the PMP, refer to Precision Measurement Processor (PMP) Manual
p/n 6510020276.
For detailed scanner schematics:
• Model 4022-30
• Model 4022-31 or -40
For cable connections between the scanner and either PMP or MXOpen,
refer to the "I" drawings for the specific model of scanner (for example,
09402230 "I").
6580800670AS02
6580800670AS03
10/18/07
6-1