Honeywell Precision Platform 4022 Series System Manual page 185

Scanner Maintenance
p/n 6510020208
5. Reinstall the snap link covers and push the whole cable ribbon
bundle so that it contacts the inside of the snap link covers at the
power track bend
6. Mark the position of the edge of the metal snap link bracket on the
top cable. Reposition the cable clamp 25 mm (1in) (Figure 9-2) from
the edge of the snap link bracket. In this position the clamp will not
restrict movement of the cable bundle.
7. Pull the cable bundle so that it is now centered in the space
between the snap link cover and snap link body. Confirm the
spacing between cable layers has not changed with the clamp
adjustment steps.
CAUTION
!
Figure 9-1 Power Track Clearance
Failure to follow this procedure can result in a
:
conductor break inside the insulation.
10/18/07
Power tracks
9-9