Table of Contents
Advertisement
A permanent virtual circuit (PVC) is a virtual circuit established for
repeated/continuous use between the same data terminal equipments (DTE). PVC can be
established as an option to provide a dedicated circuit link between two facilities. PVC
configuration is usually pre-configured by the service provider.
3.3.1 PVC
This page allows you to configure Virtual Path Identifier(VPI) and Virtual Circuit
Identifier(VCI) for each PVC. The range for the Virtual Path Identifier is 0 to 255, and
the range for the Virtual Circuit Identifier is 32 to 65535. The ATM Forum has reserved
VCI identifiers 0 to 31 for control traffic.
Bridge
EOA
AAL5
PVC
VPI
VCI
User's Guide
Display the number of the PVC profile.
Display the EOA number of the PVC profile.
Display ATM Adaptation Layer 5 (AAL5).It is used to
send variable-length packets up to 65,535 octets in size
across an Asynchronous Transfer Mode (ATM) network.
Display the PVC number with DSL interface (x-y, x
means DSL interface, y means PVC number)
Display the value of Virtual Path Identifier.
Display the value of Virtual Circuit Identifier.
42
Advertisement
Table of Contents
