Map Settings; Cli Configuration - Tripp Lite NGI-S16 Owner's Manual

5.1. Map Settings

The Topology Map function allow user to upload a picture file as the background or just
change the background color. For special purpose, it also allow user to upload a device picture
as an ICON for the port. That is, it will not care what device is connected to the port.
Notice: These image files need be uploaded with web configuration.
5.1.1.

CLI Configuration

Node Command
enable show
topology-map-settings
enable configure terminal
configure topology-map color
HHHHHH
configure topology-map picture
FILENAME
configure interface IFNAME
interface device-icon state
(disable|enable)
interface device-icon image
IMAGE_FILE
Description
This command displays the Topology Map settings.
This command changes the node to configure node.
This command configures the background color for
the Topology Map.
This command configures the background picture
for the Topology Map.
This command enters the interface configure node.
This command disables/enables the remap device
ICON of the specific port for the Topology Map.
This command configures the image file to remap
device ICON of the specific port.
58