4.4.1.2. ERPS Instance Configuration
4.4.1.2.1. CLI Configuration
Node
Command
enable
show erps instance
enable
show erps instance
<1-2>
enable
configure terminal
configure
erps instance
config-erps
instance <1-2>
-inst
control-vlan <1-4094>
data-vlan
VLANLISTS
config-erps
no instance <1-2>
-inst
config-erps
show
-inst
4.4.1.2.2. Web Configuration
Parameter
Instance Settings
Instance
Control VLAN
Data VLAN
Apply
Refresh
Instance Status
This command displays all of the ERPS instance
configurations.
This command displays the specific ERPS instance
configurations.
This command changes the node to configure node.
This command enters the instance configure node.
This command configures a new instance and
specifies its control VLAN and data VLANs.
This command removes an instance.
This command displays all of the instance
configurations.
Description
Configures the instance ID. The valid value is from 1 to 31.
Configures the control VLAN for the instance. The valid value
is from 1 to 4094.
Configures the data VLAN for the instance. The valid value is
from 1 to 4094. It can be one or multiple VLANs.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
40
Description