Others; Restoring Default Dome Settings; Restoring Default Camera Settings; Rebooting The Dome - HIKVISION DS-2AE5223TI-A User Manual

User Manual of HD-TVI Speed Dome
Steps:
(1) Enter MAIN MENUS > DOME SETTINGS > ALARM INPUT > ALARM SETTING and choose the
alarm number that you want to link the alarm output to.
(2) Move the cursor to ALARM OUTPUT and click IRIS+ to configure the alarm output to the
alarm. You can choose NONE to disable alarm outputs, choose 1 to active ALARM OUTPUT
1.
There is 1 alarm output configurable; configuring the alarm output 2 will be invalid.

3.6 Others

3.6.1 Restoring Default Dome Settings

Purpose:
You can reset all dome settings to factory default parameters as shown in the table below.
Dome settings are mainly of PTZ parameters and alarm parameters, and also include some
system settings, e.g. dome address.
Enter default dome settings menu:
MAIN MENUS > RESTORE DEFAUTLS
Click IRIS+ to restore the dome settings to the default value shown as the following table, or click
IRIS- to exit.

3.6.2 Restoring Default Camera Settings

Enter MAIN MENU > RESTORE CAMERA
Click IRIS+ to restore the camera settings to the default value; or click IRIS- to exit.
Camera settings include the image parameters, lens settings and display settings.

3.6.3 Rebooting the Dome

Enter MAIN MENU > REBOOT DOME and click IRIS+ to reboot the speed dome remotely.
© Hikvision
33