HIKVISION DS-2AE7232TI-A User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2AE7232TI-A
  6. User manual

HIKVISION DS-2AE7232TI-A User Manual

Hd-tvi speed dome
Hide thumbs Also See for DS-2AE7232TI-A:
Table of Contents

Advertisement

Quick Links

HD-TVI Speed Dome
DS-2AE7232TI-A
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2AE7232TI-A

Summary of Contents for HIKVISION DS-2AE7232TI-A

  • Page 1 HD-TVI Speed Dome DS-2AE7232TI-A User Manual...

  • Page 2: About This Manual

    © 2016-2019 Hangzhou Hikvision Digital Technology Co., Ltd. This user manual is intended for users of the Hikvision DS-2AE7232TI-A HD-TVI Speed Dome. It includes instructions on how to use the product. The software embodied in the product is governed by the user license agreement covering that product.

  • Page 3: Regulatory Information

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

  • Page 4: Safety Instruction

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions”: Warnings: Serious injury or death may be caused if any of these warnings are neglected.
  • Page 5 HD-TVI Speed Dome DS-2AE7232TI-A User Manual • Do not expose it to high electromagnetic radiating environment. • Do not aim the lens at a strong light such as the sun or an incandescent lamp. The strong light can cause fatal damage to the product.

  • Page 6: Table Of Contents

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Table of Contents About this Manual ............................2 Trademarks ............................... 2 Disclaimer ................................. 2 Support ................................2 Regulatory Information ............................ 3 FCC Information ............................3 FCC Compliance ............................3 FCC Conditions ............................3 EU Conformity Statement ........................... 3 Safety Instruction ............................
  • Page 7 HD-TVI Speed Dome DS-2AE7232TI-A User Manual Configuring the Iris, Gain, and Shutter Speed ....................21 Setting the Iris Value ..........................21 Configuring Exposure Compensation ...................... 22 Configuring White Balance ........................22 Configuring the Image Flip ........................22 Configuring the Focus Limit ........................22 Configuring the Noise Reduction ......................

  • Page 8: Overview

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual 1 Overview Description Integrated with a built-in pan/tilt unit, the speed dome features highly sensitive response and reliable performance. The speed dome can be adopted in various surveillance fields with its full-integral functions and features such as corridor, large venue, meeting room, station, neighborhoods, etc.
  • Page 9 HD-TVI Speed Dome DS-2AE7232TI-A User Manual • 3D Positioning: In the client software, use the left mouse key to click on the desired position in the video image, and drag a rectangle area in the lower right direction, then the dome system will move the position to the center and allow the rectangle area to zoom in.

  • Page 10: Getting Started

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual 2 Getting Started • Power-up Action: After the speed dome is powered on, it will perform a series of self-test actions. It runs pan checking first, then tilt checking, and camera checking last. After the power-up actions, the system information will be displayed for 120 s on the live view screen, as shown below.

  • Page 11: System-Defined Presets

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual System-Defined Presets Purpose: The section lists the system-defined presets with special functions. These presets cannot be edited, but can be called only through a control device, e.g. a DVS or Web browser. To call the system-defined presets remotely, choose the preset number from the list in the PTZ control panel.

  • Page 12: Menu Operation

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual • Error Rate: Displays the speed dome’s error rate. • Fan and Heat: Displays the speed dome’s heat information. 3 Menu Operation NOTE: • The operation interface of various speed domes may differ. Please refer to the actual operation interface.

  • Page 13: Accessing And Operating The Menu

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Before you start: You can operate the speed dome by using the on-screen display menu remotely by connecting to a DVR or a DVS (encoder). Examples of Entering Speed Dome Menu: • Enter the menu by pressing buttons: PTZ -> REC -> 9 -> 5 on the front panel of the DVR.

  • Page 14: Configuring System Information

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual 2. Click the up/down or left/right buttons in the PTZ control panel to choose a value from the list. 3. Press IRIS+ to confirm the change or click IRIS- to cancel and restore the original value. The cursor shape will again change.

  • Page 15: Dome Address Settings

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Figure 5, System Information Settings NOTE: You can click the left and right direction buttons in the PTZ control panel via the encoder Web browser to enter the next page and return to the previous page of the submenu if more than one page is available.

  • Page 16: Pelco Checksum

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Pelco Checksum The PELCO CHECKSUM is used for Pelco-P and Pelco-D protocols. If the video turns tblack or is uncontrollable, you can set the PELCO CHECKSUM to ON to improve the video quality. System Time Configuration 1.
  • Page 17 HD-TVI Speed Dome DS-2AE7232TI-A User Manual 2. Move the cursor to the target item and click IRIS+, and click up/down direction buttons to set each display mode to ON or OFF, and set each display time to 2 seconds, 5 seconds, or 10 seconds.

  • Page 18: Protocol And Rs-485 Settings

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Protocol and RS-485 Settings 1. Select the protocol. Set the protocol on the PROTOCOL submenu to AUTO MATCH, PELCO-P, PELCO-D, or HIKVISION. AUTO MATCH is protocol self-adaptive. 2. Set the protocol status. Set the PROTOCOL STATUS to ON to enable the user-defined protocol.

  • Page 19: Configuring The Focus Settings

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Figure 8, Camera Settings Configuring the Focus Settings Setting the Focus Mode 1. Move the cursor to FOCUS using the direction buttons and click IRIS+ to enter. 2. Click up/down direction buttons to set the focus mode to AF, MF, or HAF.

  • Page 20: Configuring The Zoom Settings

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual 1. You can set the FOCUS LIMIT to 1 CM, 30 CM, 1M, 3M, 5M, and AUTO to make sure that the speed dome focuses on the target. NOTE: The focus limit value varies by speed dome model.

  • Page 21: Configuring The Sharpness Level

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual • The IRCUT FILTER cannot be configured unless the IR light is turned off. D/N LEVEL. The D/N level is the light level for the auto D/N mode switch. As a threshold, the IR cut filter switches between DAY and NIGHT when the light condition reaches the user-defined D/N level.

  • Page 22: Configuring Exposure Compensation

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual NOTE: You need to change the IR CUT FILTER to DAY or NIGHT mode and set the AE MODE to MANUAL before you adjust the gain value. Set the Shutter Purpose: The electronic shutter speed controls the amount of light entering the lens in a unit of time (a second).

  • Page 23: Configuring The Noise Reduction

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Configuring the Noise Reduction To reduce the image noise, you can set the value of 2D DNR and 3D DNR respectively. The greater the value, the less noise will be in a low illumination environment. You can disable the function by turning the value to OFF.
  • Page 24 HD-TVI Speed Dome DS-2AE7232TI-A User Manual 1. Move the cursor to enter the privacy mask configuration submenu: MAIN MENUS > DOME SETTINGS > PRIVACY Figure 9, Privacy Blank Configuration Menu 2. Choose the privacy blank number: A. Move the cursor to BLANK NUM. and click IRIS+ to enter the editing mode.
  • Page 25 HD-TVI Speed Dome DS-2AE7232TI-A User Manual D. To modify the configured mask, click the IRIS+ button to enter the SET BLANK menu and click the IRIS+ button again to edit focus limit. NOTE: The tilt range for configuring the privacy blanks is from -15° to 60°.

  • Page 26: Configuring Ptz Parameters

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Figure 11, IR Settings 2. Set the IR LED sensitivity. This sets how low the ambient light must be to activate the IR LED. You can set the SENSITIVITY to HIGH (activates with a high level of ambient light), MEDIUM (activates with a medium level of ambient light), or LOW (activates with a low level of ambient light).
  • Page 27 HD-TVI Speed Dome DS-2AE7232TI-A User Manual Figure 12, PTZ Configuration • Auto-Flip: In manual tracking mode, when a target object goes directly beneath the speed dome, the speed dome automatically rotates 180 degrees horizontally for tracking. NOTE: AUTO-FLIP is set to ON for this speed dome by default and is not user-definable.

  • Page 28: Setting Limits

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual • DOME SPEED: The manual movement speed of the dome can be set from level 1 to 10. • SCAN SPEED: The scan speed defines the scan degree per second of pan scan, tilt scan, and panoramic scan.
  • Page 29 HD-TVI Speed Dome DS-2AE7232TI-A User Manual B. Click IRIS+ to enter. C. Click the up and down buttons to choose the preset number to edit. If the preset has been defined, the preset label will be listed under the number; if it has not been defined, you will see the information UNDEFINED under the number.
  • Page 30 HD-TVI Speed Dome DS-2AE7232TI-A User Manual Figure 14, Patrol Configuration Menu 2. Choose the patrol number. A. Move the cursor to PATROL NUM and click IRIS+ to enter editing mode. B. Click the up and down direction buttons to select the patrol number to be configured.
  • Page 31 HD-TVI Speed Dome DS-2AE7232TI-A User Manual that the speed dome stays at a certain preset; the patrol speed (level 1 to 40 is selectable) is the scanning speed the speed dome switches between the presets. D. Follow the above steps to define the other presets for the selected patrol. You can configure up to 32 presets in sequence for a patrol.
  • Page 32 HD-TVI Speed Dome DS-2AE7232TI-A User Manual 3. Edit the pattern. A. Move the cursor to RECORD PATTERN and click IRIS+ to enter editing mode. Figure 17, Edit the Pattern B. Click the PTZ control buttons and direction buttons to operate the speed dome to draw a movement path, including pan scan, tilt scan, zoom in, zoom out, etc.
  • Page 33 HD-TVI Speed Dome DS-2AE7232TI-A User Manual Configuring Timing Tasks Purpose: A timing task is a preconfigured action that can be performed automatically at a specific date and time. 1. Move the cursor to enter the TIMING TASK submenu: MAIN MENU > DOME SETTINGS > TIMING TASK.
  • Page 34 HD-TVI Speed Dome DS-2AE7232TI-A User Manual 5. Set the task time. A. Move the cursor to TASK TIME and click IRIS+ to enter editing mode. B. Click the left and right direction buttons to position the cursor to WEEK, START (H-M), and END (H- C.
  • Page 35 HD-TVI Speed Dome DS-2AE7232TI-A User Manual 2. Choose the zone number: A. Move the cursor to ZONE NUM. and click IRIS+ button to enter the editing mode. B. Click the up and down buttons to select the zone number to be configured.
  • Page 36 HD-TVI Speed Dome DS-2AE7232TI-A User Manual Figure 21, Smart Setting 2. Set the tracking time. A. Move the cursor to TRACK TIME and click IRIS+ button to enter the editing mode. B. Click the up and down buttons to set the duration for tracking.

  • Page 37: Configuring And Handling Alarms

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Figure 22, CLEAR SETTINGS 2. Move the cursor to the item you want to clear, and click IRIS+ to validate the settings. 3. Move the cursor to DIAGNOSTICS, and click IRIS+ to diagnose the temperature exception, video exception, voltage exception, etc.
  • Page 38 HD-TVI Speed Dome DS-2AE7232TI-A User Manual B. Click the up and down direction buttons to select the alarm number to be configured. C. Click IRIS+ again to confirm and exit editing mode of this column. NOTE: You can configure up to two alarm inputs.
  • Page 39 HD-TVI Speed Dome DS-2AE7232TI-A User Manual speed dome will respond only to input from the same channel again after the user-defined reset delay time. This is the rest time that the speed dome considers an alarm to be active when it’s physically cleared.

  • Page 40: Other

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Other Restoring Default Dome Settings Purpose: You can reset all dome settings to factory default parameters as shown below. NOTE: Dome settings are mainly of PTZ and alarm parameters and also include some system settings, e.g., dome address.

  • Page 41: Appendix

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual 4 Appendix Appendix 1 Lightning and Surge Protection This product adopts TVS plate lightning protection technology to avoid damage caused by a pulse signal that is below 3000 W, like instantaneous lighting stroke, surging, etc. According to the actual outdoor situation, necessary protection measures must be taken, besides ensuring electrical safety.

  • Page 42: Appendix 2 Rs-485 Bus Connection

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Appendix 2 RS-485 Bus Connection • General Property of RS-485 Bus According to RS-485 industry bus standard, RS-485 is a half-duplex communication bus that has 120 Ω characteristic impendence. The maximum load ability is 32 payloads (including controller device and controlled device).
  • Page 43 HD-TVI Speed Dome DS-2AE7232TI-A User Manual • Problems in the Practical Application Normally, users adopt a star-shape connection method in construction. Under this situation, the terminal resistors must be connected between the two farthest devices (as Figure 4, 1# and 15#), but...
  • Page 44 HD-TVI Speed Dome DS-2AE7232TI-A User Manual • Troubleshooting RS-485 Communication Problem Possible Reasons To Solve the Problem 1. The speed dome address or baud rate 1. Adjust the remote control device does not match those of the remote address and baud rate to match those...

  • Page 45: Appendix 3 24 Vac Wire Gauge And Transmission Distance

    HD-TVI Speed Dome DS-2AE7232TI-A User Manual Appendix 3 24 VAC Wire Gauge and Transmission Distance The following table describes the recommended maximum distance adopted for a specific wire gauge when the 24 VAC voltage loss rate is less than 10 percent. For an AC-driven device, the maximum allowed voltage loss rate is 10 percent.
  • Page 46 HD-TVI Speed Dome DS-2AE7232TI-A User Manual First Choice for Security Professionals UM THD DS-2AE7232T-x 020519NA...

Table of Contents