HIKVISION DS-2AE7225TI-A User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2AE7225TI-A
  6. User manual

HIKVISION DS-2AE7225TI-A User Manual

Hd-tvi speed dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
i
HD-TVI Speed Dome User Manual
HD-TVI Speed Dome
User Manual
UD03862B-A

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2AE7225TI-A

Summary of Contents for HIKVISION DS-2AE7225TI-A

  • Page 1 HD-TVI Speed Dome User Manual HD-TVI Speed Dome User Manual UD03862B-A...
  • Page 2 This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
  • Page 3 HD-TVI Speed Dome User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 HD-TVI Speed Dome User Manual Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘Warnings’ and ‘Cautions’: Warnings: Serious injury or death may be caused if any of these warnings are neglected. Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
  • Page 5 HD-TVI Speed Dome User Manual Cautions:  Make sure the power supply voltage is correct before using the product.  Do not drop the product or subject it to physical shock. Do not install the product on vibratory surface or places. ...

  • Page 6: Table Of Contents

    HD-TVI Speed Dome User Manual Table of Contents Chapter 1 Overview ........................1 Description ..........................1 Functions ..........................1 Chapter 2 Getting Started ......................4 Power-up Action ........................4 Basic Operations ........................5 System-defined Presets ......................5 On-screen Displays ........................6 Chapter 3 Menu Operation .......................

  • Page 7: Chapter 1 Overview

    HD-TVI Speed Dome User Manual Chapter 1 Overview 1.1 Description Integrated with the built-in pan/tilt unit, the HD-TVI speed dome features highly sensitive response and reliable performance. The speed dome can be adopted in various video fields with its full-integral functions and features, such as corridor, large venue, meeting room, station, neighborhoods, etc.
  • Page 8 HD-TVI Speed Dome User Manual In manual tracking mode, when a target object goes directly beneath the dome, the video will automatically flips 180 degrees in horizontal direction to maintain continuity of tracking. This function can also be realized by auto mirror image depending on different camera models. ...
  • Page 9 HD-TVI Speed Dome User Manual are in auto status during the pattern is being memorized.  Power Off Memory The dome supports the power off memory capability with the predefined resume time. It allows the dome to resume its previous position after power is restored. ...

  • Page 10: Chapter 2 Getting Started

    HD-TVI Speed Dome User Manual Chapter 2 Getting Started 2.1 Power-up Action After the speed dome is power-on, it will perform a series of self-test actions. It runs the pan checking firstly, then the tilt checking and the camera checking at last. After the power-up actions, the system information will be displayed for 120 s on the live view screen as shown below.

  • Page 11: Basic Operations

    HD-TVI Speed Dome User Manual 2.2 Basic Operations You can operate the speed dome by using a control device, including the control keyboard, DVR, DVS, etc. In this manual, accessing the speed dome via the web browser will be taken as the example.

  • Page 12: On-Screen Displays

    HD-TVI Speed Dome User Manual 2.4 On-screen Displays The speed dome supports following on-screen displays: Zoom Ratio: Identifies the amount of magnification. The format is ZXXX. XXX is the zoom amount. PT Angle: Displays panning and tilting direction, with the format of NEXXX/TXXX. The NE followed with XXX indicates the degrees in north east direction, while the T followed with XXX indicates the degrees in tilt position.

  • Page 13: Chapter 3 Menu Operation

    HD-TVI Speed Dome User Manual Chapter 3 Menu Operation  The operation interface of the different speed domes may differ. Please refer to the actual operation interface.  You can click the left and right direction buttons in the PTZ control panel via the web browser of the DVR to enter the next page or return to the previous page of the submenu if more than one page is available.

  • Page 14: Accessing And Operating The Menu

    HD-TVI Speed Dome User Manual 3.1 Accessing and Operating the Menu To enter the main menu: Steps: 1. Connect the video and RS-485 cables of speed dome to a DVR. 2. Visit the DVR via the web browser. 3. View the live video of the speed dome. 4.

  • Page 15: Configuring System Parameters

    HD-TVI Speed Dome User Manual model, address, protocol, etc. The information shown on this submenu is similar to the system information shown after the power-up action. Please refer to Section 2.1 for more details. Enter the system information display menu: MAIN MENUS >...
  • Page 16 HD-TVI Speed Dome User Manual  Dome address settings To Set the Soft Address of the Speed Dome If the SET SOFT ADDR ACT is set as ON, the soft address is the valid address for connecting the speed dome. The selectable soft address ranges from 1 to 255; If the SET SOFT ADDR ACT is set as OFF, the hard address set by the DIP switch is the valid address of the speed dome.
  • Page 17 HD-TVI Speed Dome User Manual Y - M - D 16 12 12 H - M - S 15 33 25 DONE: OPEN QUIR: CLOSE Figure 3-5 Set the System Time  Zero Angle Configuration Purpose: You can define the zero angle of the speed dome on the ZERO ANGLE submenu. Steps: 1.
  • Page 18  Select the protocol. Choose the protocol on PROTOCAL submenu. You can configure it as AUTO MATCH, PELCO-P, PELCO-D, or HIKVISION. When you choose AUTO MATCH, it is protocol self-adaptive.  Set the protocol status. Set the PROTOCOL STATUS as ON to enable the user-defined protocol.

  • Page 19: Configuring Image Parameters

    HD-TVI Speed Dome User Manual  Enable the RS-485 configuration diagnosis. You can set 485 CHECK as ON or AUTO for automatic RS-485 configuration diagnosis. If the configuration is incorrect, an alert will be received; if you set the value as AUTO, it will automatically stop the diagnosis when no errors exist.
  • Page 20 HD-TVI Speed Dome User Manual CAMERA WHITE BALAN BLUE IMAGE FLIP FOCUS LIMIT 2D DNR 3D DNR BACK EXIT Figure 3-7 Camera Settings Task 1: Configure the focus settings.  Setting the focus mode Steps: 1. Move the cursor to FOCUS using the direction buttons and click IRIS+ to enter. 2.
  • Page 21 HD-TVI Speed Dome User Manual If you set the ZOOM LIMIT as the minimum value 22, the digital zoom function will be disabled, and the optical zoom function is at its maximum value.  Configure the zoom speed. Purpose: You can define the speed at which the lens changes from full wide zoom to the optical zoom. Steps: 1.
  • Page 22 HD-TVI Speed Dome User Manual (2) BLC LEVEL. You can manually adjust the backlight compensation level. Task 6: Configuring the iris, gain and shutter speed  Set the Exposure Mode Purpose: AE mode defines the priority of iris, shutter and gain while the speed dome adjusting the brightness of the live view.
  • Page 23 HD-TVI Speed Dome User Manual The value of X indicates that the shutter speed is 1/X second. If you set the SHUTTER value bigger (shutter speed is faster), the amount of entering light per second is fewer, and the image is darker. (2) Slow shutter.
  • Page 24 HD-TVI Speed Dome User Manual Task 12: Configure the image quality.  Wide Limit Set the value of WIDE LIMIT to limit the minimum zoom of the lens with 1.0, 1.1, 1.2, 1.3, 1.5, 1.8 and 2.0 available. The Wide Limit function is supported by certain speed dome model series. ...

  • Page 25: Configuring Privacy Mask

    HD-TVI Speed Dome User Manual When there is fog in the image, you can enable this function to get clear image. Task 14: Configure the lens initialization. You can turn INIT LENS on to trigger a spontaneous lens initiation to ensure the normal operation.

  • Page 26: Configuring Output Standard

    HD-TVI Speed Dome User Manual Figure 3-9 Set the Privacy Mask (2) You can see ADJUST BLANK POS message on the screen. Click the direction buttons to adjust the position of the privacy blank to the designed scene. (3) Click FOCUS+ button, and you can see ADJUST BLANK SIZE message on the screen. Click the up/down buttons to increase/decrease the height of the mask and click right/left buttons to increase/decrease the width of the mask.

  • Page 27: Configuring Ir Parameters

    HD-TVI Speed Dome User Manual 3.3.4 Configuring IR Parameters The IR parameter settings are supported by IR speed domes only. Purpose: You can configure the IR parameters including the IR sensitivity, n/m LED current, far LED current, reference zoom, and LED control, fan control, switch delay, smart IR, etc.. Enter the LED parameter submenu: MAIN MENU >...

  • Page 28: Configuring Ptz Control Parameters

    HD-TVI Speed Dome User Manual 3.4 Configuring PTZ Control Parameters Purpose: You can configure panning, tilting and zooming movements, and configure PTZ control functions including presets, patrols, patterns, etc. for the speed dome. 3.4.1 Configuring PTZ Parameters Enter PTZ configuration menu: MAIN MENU >...
  • Page 29 HD-TVI Speed Dome User Manual If no control signal is received after the park time under the following circumstances, no park actions will be performed: in the process of performing dome actions by calling special presets; or in the process of performing external alarm linkage actions. ...

  • Page 30: Configuring Presets

    HD-TVI Speed Dome User Manual  Elevation set You can set the SET ELEVATION as ON to increase the elevation angle range of the speed dome or set it as OFF to disable the function. The range of the elevation angle varies from different speed dome models. 3.4.2 Configuring Presets Purpose: A preset is a user-defined monitoring position/point.

  • Page 31: Configuring Patrols

    HD-TVI Speed Dome User Manual You can select the preset number from the drop-down preset list in the control panel of the encoder through a web browser, and click the arrow to call a user-defined or system-defined preset. 5. Clear the preset settings. Move the cursor to CLEAR and click IRIS+ to clear the settings of the current preset.

  • Page 32: Configuring Patterns

    HD-TVI Speed Dome User Manual NUM PST DWELL DONE: OPEN QUIT: CLOSE Figure 3-14 Edit the Patrol (2) Click up/down direction buttons to choose the number and locate the preset to be edited. (3) Click left/right direction buttons to position the cursor to the column of PRESET, DWELL and SPEED.
  • Page 33 HD-TVI Speed Dome User Manual and power-up). Steps: 1. Move the cursor to enter the PATTERNS submenu: MAIN MENU > DOME SETTINGS > PATTERNS Figure 3-15 Pattern Configuration Menu 2. Choose the pattern number. (1) Move the cursor to PATTERN NUM and click IRIS+ to enter the editing mode. (2) Click the up/down direction buttons to select the number of the pattern which is to be configured.

  • Page 34: Configuring Timing Tasks

    HD-TVI Speed Dome User Manual remaining memory shown under PATTERNS menu as REMAINING.  The pan/tilt movements and the lens operations cannot be memorized simultaneously. 4. Preview the pattern. Enter the PREVIEW menu to preview the current pattern. 5. Call the defined pattern. You can call the special presets to call the defined pattern.
  • Page 35 HD-TVI Speed Dome User Manual Up to 8 time tasks can be configured. 3. Set the task status. Steps: (1) Move the cursor to ENABLE TASK and click IRIS+ to enter the editing mode. (2) Click the up/down direction buttons to set the task status as ON. (3) Click IRIS+ again to confirm the settings and exit the editing mode of this column.

  • Page 36: Configuring Zone

    HD-TVI Speed Dome User Manual 3.4.6 Configuring Zone Purpose: A zone is a panning and tilting area defined by the left/right limits. You can configure the zones on ZONES submenu. You can define a zone when the targeted video security scene is limited. Steps: 1.
  • Page 37 HD-TVI Speed Dome User Manual 3.4.7 Configuring Smart Settings Purpose: Set the smart settings as ON to automatically track the moving object, and meanwhile adjusts the focus and the position to set the target in the center of the field of view. Steps: 1.

  • Page 38: Configuring And Handling Alarms

    HD-TVI Speed Dome User Manual Figure 3-21 CLEAR SETTINGS 2. Move the cursor to the item you want to clear, and click IRIS+ to validate the settings. 3. Move the cursor to the DIAGNOSTICS and click IRIS+ to diagnose the temperature exception, video exception, voltage exception, etc.

  • Page 39: Configuring Alarm Parameters

    HD-TVI Speed Dome User Manual 2. Choose the alarm number. Steps: (1) Move the cursor to ALARM NUM and click the IRIS+ to enter the editing mode. (2) Click the up and down direction buttons to select the number of the alarm which is to be configured.

  • Page 40: Configuring Alarm Output

    HD-TVI Speed Dome User Manual 2. Configure the interval of the alarm sequence. When more than one alarm of the same priority occurs at the same time, the speed dome will respond to one alarm first and then respond to the next one after the user-defined interval. You can set the on SEQUENCE submenu from 1 to 200 seconds.

  • Page 41: Others

    HD-TVI Speed Dome User Manual (1) Enter MAIN MENUS > DOME SETTINGS > ALARMS > ALARM SETTING and choose the alarm number that you want to link the alarm output to. (2) Move the cursor to AUXS and click IRIS+ to configure the alarm output to the alarm. You can choose OPEN to active AUX 1.

  • Page 42: Appendix

    HD-TVI Speed Dome User Manual Appendix Appendix 1 Lightning & Surge Protection This product adopts TVS plate lightning protection technology to avoid damage caused by pulse signal that is below 3000W, like instantaneous lighting stroke, surging, etc. According to the actual outdoor situation, necessary protection measures must be taken, besides ensuring the electrical safety.

  • Page 43: Appendix 2 Rs485 Bus Connection

    HD-TVI Speed Dome User Manual Appendix 2 RS485 Bus Connection  General Property of RS485 Bus According to RS485 industry bus standard, RS485 is a half-duplex communication bus which has 120Ω characteristic impendence, the maximum load ability is 32 payloads (including controller device and controlled device).
  • Page 44 HD-TVI Speed Dome User Manual Figure A-4 Star Shape Connection For such case, the best way is adding a RS485 distributor. This product can effectively change the star-shape connection to which satisfies the requirement of RS485 industry standard, in order to avoid those problems and improve the communication reliability.
  • Page 45 HD-TVI Speed Dome User Manual Problem Possible Reasons To Solve the Problem dome can tightly. 2. RS485+ or RS485-wire is 2. Change a RS485 wire. controlled broken. but not 3. The speed dome is too far away 3. Add a terminal resistor. smoothly.

  • Page 46: Appendix 3 24Vac Wire Gauge & Transmission Distance

    HD-TVI Speed Dome User Manual Appendix 3 24VAC Wire Gauge & Transmission Distance The following table describes the recommended Max. distance adopted for the certain wire gauge when the loss rate of 24VAC voltage is less than 10%. For the AC driven device, the maximum voltage loss rate is 10% allowable.

  • Page 47: Appendix 4 Wire Gauge Standards

    HD-TVI Speed Dome User Manual Appendix 4 Wire Gauge Standards American Cross-sectional Bare Wire British Wire Wire Gauge Area of Bare Gauge(mm) Gauge SWG Wire(mm 0.750 0.4417 0.800 0.5027 0.900 0.6362 1.000 0.7854 1.250 1.2266 1.500 1.7663 2.000 3.1420 2.500 4.9080 3.000 7.0683...
  • Page 48 HD-TVI Speed Dome User Manual...

This manual is also suitable for:

Ds-2ae4215ti-dDs-2ae4215t-d3Ds-2ae7232ti-aDs-2ae5225ti-aDs-2ae5232t-a3Ds-2ae5232t-a ... Show all

Table of Contents