HIKVISION DS-2AE4215T-D User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2AE4215T-D
  6. User manual

HIKVISION DS-2AE4215T-D User Manual

Hd-tvi speed dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HD-TVI Speed Dome
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2AE4215T-D

Summary of Contents for HIKVISION DS-2AE4215T-D

  • Page 1 HD-TVI Speed Dome User Manual...
  • Page 2 This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
  • Page 3 HD-TVI Speed Dome User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 HD-TVI Speed Dome User Manual Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘Warnings’ and ‘Cautions’: Warnings: Serious injury or death may be caused if any of these warnings are neglected. Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
  • Page 5 HD-TVI Speed Dome User Manual Cautions:  Make sure the power supply voltage is correct before using the product.  Do not drop the product or subject it to physical shock. Do not install the product on vibratory surface or places. ...

  • Page 6: Table Of Contents

    HD-TVI Speed Dome User Manual Table of Contents Chapter 1 Overview ........................1 Description ..........................1 Functions ..........................1 Chapter 2 Getting Started ......................4 Power-up Action ........................4 Basic Operations ........................4 System-defined Presets ......................5 On-screen Displays ........................5 Chapter 3 Menu Operation .......................

  • Page 7: Chapter 1 Overview

    HD-TVI Speed Dome User Manual Chapter 1 Overview 1.1 Description Integrated with the built-in pan/tilt unit, the HD-TVI speed dome features highly sensitive response and reliable performance. The speed dome can be adopted in various video security scenes with its full-integral functions and features, such as corridor, large venue, meeting room, station, neighborhoods, etc.
  • Page 8 HD-TVI Speed Dome User Manual In manual tracking mode, when a target object goes directly beneath the dome, the video will be automatically flipped 180 degrees in horizontal direction to maintain continuity of tracking. This function can also be realized by auto mirror image depending on different camera models. ...
  • Page 9 HD-TVI Speed Dome User Manual iris are in auto status during the pattern is being memorized.  Power Off Memory The dome supports the power off memory capability with the predefined resume time. It allows the dome to resume its previous position after power is restored. ...

  • Page 10: Chapter 2 Getting Started

    HD-TVI Speed Dome User Manual Chapter 2 Getting Started 2.1 Power-up Action After the speed dome is power-on, it will perform a series of self-test actions. The interface will be shown as below: Figure 2-1 Original Interface Table 2-1 Descriptions of the original interface The serial No.

  • Page 11: System-Defined Presets

    HD-TVI Speed Dome User Manual Panning and tilting: Click the direction buttons to control the pan and tilt movement of the speed dome. Zooming: Click the ZOOM+ and ZOOM- buttons to control the zooming. Focusing: Click the FOCUS+ and FOCUS- buttons to adjust the focus. Iris: Click the IRIS+ and IRIS- buttons to adjust the iris.
  • Page 12 HD-TVI Speed Dome User Manual Alarm: When an alarm is triggered, the corresponding information will be displayed. Time: Displayed as Day/Month/Year/Day of Week/Hour/Minute. It supports 24-hour time system. Preset Label: After you call the configured preset, the preset number is displayed if the lens moves to the certain place where you’ve set a preset for.

  • Page 13: Chapter 3 Menu Operation

    HD-TVI Speed Dome User Manual Chapter 3 Menu Operation  The menu operation part is only for your reference. The actual display may vary with your camera model.  You can click the left and right direction buttons in the PTZ control panel via the web browser of the DVR to enter the next page or return to the previous page of the submenu if more than one page is available.

  • Page 14: Accessing And Operating The Menu

    HD-TVI Speed Dome User Manual 3.1 Accessing and Operating the Menu To call the main menu: Steps: 1. Connect the video and RS-485 cables of speed dome to a DVR. 2. Visit the DVR via the web browser. 3. View the live video of the speed dome. 4.

  • Page 15: Configuring System Parameters

    HD-TVI Speed Dome User Manual information shown after the power-up action. Please refer to Section 2.1 for more details. Enter the system information display menu: MAIN MENUS > SYS INFO Figure 3-3 System Information  Information on this menu cannot be edited. ...
  • Page 16 HD-TVI Speed Dome User Manual  Dome address settings To Set the Soft Address of the Speed Dome If the SOFT ADDR ACT is set to ON, the soft address is the valid address for connecting the speed dome. If the SOFT ADDR ACT is set to OFF, the hard address set by the DIP switch is the valid address of the speed dome.
  • Page 17 HD-TVI Speed Dome User Manual Figure 3-5 Set the System Time  Zero Angle Configuration Purpose: You can define the zero angle of the speed dome on the ZERO ANGLE submenu. Steps: 1. Move the cursor to ZERO ANGLE using the direction buttons and click IRIS+ to enter. 2.
  • Page 18  Select the protocol. Choose the protocol on PROTOCAL submenu. You can configure it as AUTO MATCH, PELCO-P, PELCO-D, or HIKVISION. When you choose AUTO MATCH, it is protocol self-adaptive.  Set the protocol status. Set the PROTOCOL STATUS to ON to enable the user-defined protocol.

  • Page 19: Configuring Image Parameters

    HD-TVI Speed Dome User Manual  Power Memory Settings The dome can resume its previous PTZ status after it restarted from a power-off when it stops at a position longer than the predefined time. You can set the memory time to 10S, 30S, 60S, 180S, and 300S.
  • Page 20 HD-TVI Speed Dome User Manual CAMERA WHITE BALAN BLUE IMAGE FLIP FOCUS LIMIT 2D DNR 3D DNR BACK EXIT Figure 3-7 Camera Settings Task 1: Configure the focus settings.  Setting the focus mode Steps: 1. Move the cursor to FOCUS using the direction buttons and click IRIS+ to enter. 2.
  • Page 21 HD-TVI Speed Dome User Manual You can define the speed at which the lens changes from full wide zoom to the optical zoom. Steps: 1. Move the cursor to ZOOM SPEED using the direction buttons and click IRIS+ to enter. 2.
  • Page 22 HD-TVI Speed Dome User Manual responding to the lighting conditions. It is the default mode. IRIS: User-defined iris value, auto shutter and auto gain. It is the iris-priority mode. Please define the iris value according to related content in this section if you choose IRIS mode. SHUTTER: User-defined shutter speed, auto iris and auto gain.
  • Page 23 HD-TVI Speed Dome User Manual (auto-tracking) and HAUTO (half-auto). AUTO: In Auto mode, the dome retains color balance automatically according to the current color temperature. INDOOR, OUTDOOR: These two modes are for indoor use and outdoor use respectively. SELFDEF: In this mode, you can adjust the color temperature manually to meet your own demand. In SELFDEF mode, you need to adjust the RED and BLUE values manually.

  • Page 24: Configuring Privacy Mask

    HD-TVI Speed Dome User Manual  Saturation Saturation value indicates the brightness of the color. The higher the saturation, the brighter the color is. The saturation function is supported by certain speed dome model series.  Scene Mode Select the scene mode as INDOOR or OUTDOOR, and the default image settings will be changed according to the selected scene mode.
  • Page 25 HD-TVI Speed Dome User Manual Figure 3-8 Privacy Mask Configuration Menu 2. Choose the privacy mask number: Steps: (1) Move the cursor to MASK NO. and click IRIS+ to enter the editing mode. (2) Click the up and down direction buttons to select a mask number for configuration. (3) Click IRIS+ again to confirm and exit the editing mode.

  • Page 26: Configuring Output Standard

    HD-TVI Speed Dome User Manual If no privacy mask has been configured, you cannot set the status to ON. 5. Delete the privacy mask. You can enter the CLEAR MASK menu to delete the all the configured privacy mask. 3.3.3 Configuring Output Standard Purpose: The video output standard, including resolution and frame rate, can be changed according to the actual requirement.

  • Page 27: Configuring Ptz Control Parameters

    HD-TVI Speed Dome User Manual  Set the electricity level of the IR LED. The N/M LED CURRENT and the FAR LED CURRENT refer to the electricity level of the near/middle IR LED and far IR LED correspondingly.  Set the parameters for reference zoom. The value of REFERENCE ZOOM can be adjusted from 2 to 10.
  • Page 28 HD-TVI Speed Dome User Manual  Proportional Pan When the speed dome is zooming in/out, you can enable the proportional pan function to automatically reduce or increase the panning and tilting speed according to the zooming amount. This function enables the speed dome to trace the object at a proper speed when the speed dome is zooming and the monitored scene is narrowed (zoom in) or enlarged (zoom out).

  • Page 29: Configuring Presets

    HD-TVI Speed Dome User Manual Steps: 1. Move the cursor to ENABLE LIMIT and click FOCUS+ to set it ON to enable this feature. Click IRIS+ to confirm the new settings. 2. Move the cursor to SETTING STOPS and click IRIS+. You will see the message SET LEFT LIMIT on the screen.

  • Page 30: Configuring Patrols

    HD-TVI Speed Dome User Manual The system-defined presets will be displayed on this submenu and they are not editable. 3. Set the preset position. Move the cursor to PRESET PTZ and click IRIS+ to edit the preset position. Use the direction buttons to move the speed dome to find the desired scene/position, and then press IRIS+ to confirm the settings and return to the previous menu, or press IRIS- to cancel.
  • Page 31 HD-TVI Speed Dome User Manual DVR to 15s, corresponding to the dome it would be 140s. Refer to the interface for more details. However, if you select EQUAL, they will be exactly the same. 4. Edit the patrol. Steps: (1) Move the cursor to EDIT PATROL and click IRIS+ to enter editing mode. Figure 3-14 Edit the Patrol (2) Click up/down direction buttons to choose the number and locate the preset to be edited.

  • Page 32: Configuring Patterns

    HD-TVI Speed Dome User Manual 3.4.4 Configuring Patterns Purpose: A pattern is a memorized, repeatable series of pan, tilt, zoom and preset movements that can be recalled by a command or automatically performed by a configured function (alarm, park, time task, and power-up).

  • Page 33: Configuring Timing Tasks

    HD-TVI Speed Dome User Manual  REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the patterns. When it reaches 0, no more patterns can be configured. You can also see the remaining memory shown under PATTERNS menu as REMAINING. ...
  • Page 34 HD-TVI Speed Dome User Manual (2) Click the up/down direction buttons to select the number of the task which is to be configured. (3) Click IRIS+ again to confirm the settings and exit the editing mode. 3. Set the task status. Steps: (1) Move the cursor to TASK STATUS and click IRIS+ to enter the editing mode.

  • Page 35: Configuring Zone

    HD-TVI Speed Dome User Manual 3.4.6 Configuring Zone Purpose: A zone is a panning and tilting area defined by the left/right limits. You can configure the zones in ZONES submenu. You can define a zone when the targeted video security scene is limited. Steps: 1.
  • Page 36 HD-TVI Speed Dome User Manual 3.4.7 Configuring Smart Settings Purpose: Set the SMART SETTINGS to ON to automatically track the moving object, meanwhile adjusts the focus and the position to set the target in the center of the view. Steps: 1.

  • Page 37: Configuring And Handling Alarms

    HD-TVI Speed Dome User Manual Figure 3-21 CLEAR SETTINGS 2. Move the cursor to the item you want to clear, and click IRIS+ to validate the settings. 3. Move the cursor to the <DIAGNOSTICS> and click IRIS+ to diagnose the temperature exception, video exception, voltage exception, etc.

  • Page 38: Configuring Alarm Parameters

    HD-TVI Speed Dome User Manual (1) Move the cursor to ALARM NO. and click the IRIS+ to enter the editing mode. (2) Click the up and down direction buttons to select the number of the alarm which is to be configured.

  • Page 39: Configuring Alarm Output

    HD-TVI Speed Dome User Manual cleared. 4. Resume the dome activity. You can set ALARM RESUME to ON to enable the speed dome to resume its previous activity after the triggered actions finished.  If the speed dome is moving when a linkage action is triggered, it will stop at the current position and resume from this position after the linkage action is finished.

  • Page 40: Others

    HD-TVI Speed Dome User Manual 3.6 Others 3.6.1 Restoring Default Dome Settings Purpose: You can reset all dome settings to factory default parameters as shown in below. Dome settings are mainly of PTZ parameters and alarm parameters, and also include some system settings, e.g.

  • Page 41: Appendix

    HD-TVI Speed Dome User Manual Appendix Appendix 1 Lightning & Surge Protection This product adopts TVS plate lightning protection technology to avoid damage caused by pulse signal that is below 3000W, like instantaneous lighting stroke, surging, etc. According to the actual outdoor situation, necessary protection measures must be taken, besides ensuring the electrical safety.

  • Page 42: Appendix 2 Rs485 Bus Connection

    HD-TVI Speed Dome User Manual Appendix 2 RS485 Bus Connection  General Property of RS485 Bus According to RS485 industry bus standard, RS485 is a half-duplex communication bus which has 120Ω characteristic impendence, the maximum load ability is 32 payloads (including controller device and controlled device).
  • Page 43 HD-TVI Speed Dome User Manual Figure A-4 Star Shape Connection For such case, the best way is adding a RS485 distributor. This product can effectively change the star-shape connection to which satisfies the requirement of RS485 industry standard, in order to avoid those problems and improve the communication reliability.
  • Page 44 HD-TVI Speed Dome User Manual Problem Possible Reasons To Solve the Problem dome can tightly. 2. RS485+ or RS485-wire is 2. Change a RS485 wire. controlled broken. but not 3. The speed dome is too far away 3. Add a terminal resistor. smoothly.

  • Page 45: Appendix 3 24 Vac Wire Gauge & Transmission Distance

    HD-TVI Speed Dome User Manual Appendix 3 24 VAC Wire Gauge & Transmission Distance The following table describes the recommended maximum distance adopted for the certain wire gauge when the loss rate of 24 VAC voltage is less than 10%. For the AC driven device, the maximum voltage loss rate is 10% allowable.

  • Page 46: Appendix 4 Wire Gauge Standards

    HD-TVI Speed Dome User Manual Appendix 4 Wire Gauge Standards American Cross-sectional Bare Wire British Wire Wire Gauge Area of Bare Gauge(mm) Gauge SWG Wire (mm 0.750 0.4417 0.800 0.5027 0.900 0.6362 1.000 0.7854 1.250 1.2266 1.500 1.7663 2.000 3.1420 2.500 4.9080 3.000...
  • Page 47 HD-TVI Speed Dome User Manual UD15212B-A...

Table of Contents