Download Print this page

Led Indicators - Cisco Meraki MT12 Installation Manual

Advertisement

Physical Specifications
Dimensions
Protection
Power
Operating environment
Hardware

LED Indicators

• Rainbow = MT is initializing or looking for a gateway
• Solid green (for n seconds) = connected to a gateway
• Solid amber (for n seconds) = MT could not find a gateway to connect
• Flashing green = MT is upgrading its firmware
• Flashing amber = MT is running on a low battery
To conserve battery life, the LEDs on the MT12 don't always remain on.
117.1x65.7x23.3 mm (LxWxH)
IPX5 Rated
• 2x AA alkaline batteries
• Permanent DC power: 5V; 0.2A USB-C (sold
separately)
• Temperature: 0°C - 55°C (32F - 131F)
• Relative Humidity: 0 - 95% RH
• Multicolor, multifunction status LED
• General purpose button
• Reset button
• USB-C port
• Water leak detection plug (female)
5

Advertisement

loading