Black & Decker BPWH84W Instruction Manual page 33

TROUBLESHOOTING & WARRANTY
SYMPTOMS
Washer not
filling properly
Water leaks
every load
POSSIBLE CAUSE
Filter clogged.
Inlet hoses may be
kinked Insufficient water
supply.
The washer lid is open.
Water inlet valve
damaged.
Hoses not installed
correctly.
SOLUTIONS
Disassemble the water inlet hose and
clean the inlet point. Check that inlet
hoses are not kinked or clogged.
Make sure that water faucets are
turned on all the way.
The washer will not operate if the
lid is open. Close the lid and make
sure that nothing is caught under
the lid preventing it from closing
completely. Check inlet hose
connections. Contact Customer
Satisfaction Center if you think the
water inlet valve is damaged.
Check all fill and drain hose
connections to ensure that they are
tight and secure.
Page 33