Control Panel - Black & Decker BPWH84W Instruction Manual

SET UP & USE

CONTROL PANEL

7 8
6 5 4 3 2 1
1. Power
Press the POWER button once to turn ON the power to the washer. Press again to
turn OFF the unit.
2. Start/Pause
Press Start/Pause once to start the wash cycle. Press again during operation to
PAUSE the cycle. Press again to continue the cycle.
3. Program
Press the Program button to select from the following wash cycles: 01 (Normal), 02
(Cotton), 03 (Gentle), 04 (Speed Wash), 05 (Spin), 06 (Whites), 07 (Heavy Soil), 08
(Tub Clean)
4. Rinse + (Press 3 sec.)
Press and hold this button for 3 seconds in order to select additional rinse cycles. You
can select 2, 3 or 4 rinse cycles.
Note: Additional rinse times cannot be selected with Speed Wash, Spin and Tub
Clean cycles
5. Load Size
Press Load Size for 3 seconds to choose from 01 (Small) 02 (Medium) and 03 (Large)
based on the size of the load of laundry when using normal, cotton, gentle, whites
and heavy soil programs. The selected load size will determine the water fill level. You
will see the number associated with the load size in the digital display.
When selecting the Speed Wash program the washer will automatically be set at 01
(Small)
Tub clean will automatically set load size to 03 (Large)
A water level is not selected for spin cycles.
Page 21