Programming The Telephone - GE 28821 Series User Manual

pushing the door up until it snaps into place.
Base Station
1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C),
and place your cordless telephone on a level surface, such as a desktop or
tabletop, or you may mount it on the wall.
2. Plug one end of the telephone line cord into the TEL LINE jack on the back of
the base and the other end into a modular jack.
3. Plug the AC power converter into the electrical outlet and the DC connector
into the jack on the back of the base.
4. Place the handset in the base cradle. The charge/in use/voicemail indicator
turns on, verifying the battery is charging.
5. Allow the phone to charge for 16 hours prior to first use. If you don' t properly
charge the phone, battery performance is compromised.
CAUTION: To reduce risk of personal injury, fire, or damage use
only the 5-2812 power adaptor listed in the user's guide. This
power adaptor is intended to be correctly orientated in a vertical
or floor mount position.

Programming the Telephone