Message Alert
This feature sets your answering system to give an alert tone every 10 seconds when
there are new messages.
From the Answerer Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the MESSAGE ALERT sub-
menu.
. Press mute/menu OK button to enter the menu. NEW MSG ALERT 1ON 2OFF
shows in the display.
. Use the touch-tone pad to enter the selection, or use the caller ID-volume (5 or
6) button to scroll to the 1ON or 2OFF. The default setting is 2OFF.
. Press the mute/menu OK button to confirm. You will hear a confirmation tone and
the new setting shows in the display.
Security Code
You can access the answering system from a tone dialing telephone in another
(remote) location. The security code is required for remote access, and it prevents
unauthorized access to your answering system.
From the Answerer menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the SECURITY CODE sub-
menu.
. Press mute/menu OK button to enter the menu. SECURITY CODE 1 2 3 shows in
the display.
. Use the touch-tone pad to enter your new -digit security code. The default setting
is 123.
. Press the mute/menu OK button to confirm. You will hear a confirmation tone and
the new security code shows in the display.
NOTE: If you make a mistake, use the delete/intercom/conf button
to delete the security code and begin again.
19