Receiver Volume Control; Do Not Disturb (Dnd) - GE 28821 Series User Manual

Mute
To have a private, off-line conversation, use the MUTE feature. The party on the
telephone line cannot hear you, but you can hear them.
1. Press the mute/menu OK
. Press the mute/menu OK

Receiver Volume Control

When the handset is ON (in TALK mode) you may adjust the receiver volume by
pressing the caller ID-volume ( 6 or 5) button. There are
from. When the maximum or minimum volume level is reached, the phone beeps
twice. VOL 1 is minimum and
Do Not Disturb (D-N-D)
This feature allows you to turn off all the handset ringer(s) at once, by pressing one
button at the base unit, even though the ringer volume of handset(s) has been preset.
1. In the standby mode, press the DO NOT DISTURB button on the base.
. The DND indicator will light and DO NOT DISTURB shows in each handset display.
. To cancel, press the DO NOT DISTURB button again.
NOTE: You can press the DO NOT DISTURB button and activate the
function immediately, even when there is incoming call ringing in,
or during call screening after the call is taken by the answerer.
button. The handset display shows MUTE ON.
button to cancel and return to your phone conversation.
VOL 5 is maximum.
five volume levels to choose
9