Ringer
Volume
There are two ways to set the ringer volume. One is the traditional way as described
in the Programming Functions; Handset Setup; Ringer Volume menus. The other one
is this short cut to ringer menu.
1. Make sure the phone is OFF (not in TALK mode).
. Press the
#pause
. Use the caller ID-volume (6 or 5) button to scroll to your selection.
default setting.
. Press
#pause
seconds.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call Waiting
calls. During a phone call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information for the waiting call shows on the handset display.
• To connect to the waiting call, press the
and your original call is put on hold.
• To switch between the two calls, press the
6
(Shortcut)
button to display SET RINGER
button again to save and display the new selection for a few
LEVEL
5.
TALK or SPEAKER
TALK or SPEAKER
LEVEL 5
button on the handset,
button.
is the