Troubleshooting - Makita DCL500Z Instruction Manual

2
Cleaning the cleaner body
From time to time wipe off the outside
(cleaner body) of the cleaner using a cloth
dampened in soapy water.
CAUTION:
• Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration,
deformation or cracks may result.
TROUBLE SHOOTING
Before asking for repairs, check the following points.
Symptom
Weak suction power
Not working
010051
NOTE:
• Do not attempt to repair cleaner by
yourself.
To maintain product SAFETY and
RELIABILITY, repairs, any other
maintenance or adjustment should be
performed by Makita Authorized Service
Centers, always using Makita replacement
parts.
1. Cylindrical filter
(upper)
2. Cylindrical filter
(lower)
1
Area to be investigated
• Is dust cup full of dust?
• Is filter clogged?
• Is battery exhausted?
• Is battery exhausted?
Dry it out thoroughly before use. An
insufficiently dried filter may cause poor
suction and shorten the service life of the
motor.
Do not blow dust sticking on the cleaner by
air duster. It brings dust into the housing and
causes failure.
STORAGE
Shorten the zoom pipe and insert the hook
into the holder securely.
Fixing method
• Empty dust from dust cup.
• Dust down or wash filter.
• Recharge battery.
• Recharge battery.
9