Makita 5104 Manual page 8

R
epair
[4] ADJUSTMENT
Squaring Adjustment of Saw Blade
Fig.14
Adjustment to 90 degrees
Hex wrench
1R208
Base
Adjsut by turning Hex wrench until
both Saw blade and Base contact
1R208 closely.
Fig.15
The assembled Lever 54 and Base have to be adjusted at most 30 degrees
to the level of Base when the machine is set at the max. cutting depth.
Saw blade
Triangular rule
Set the machine to fully tilted position.
And adjust by turning Hex wrech until
both Saw blade and Base contact
the triangular rule closely.
Lever 54
Adjustment to 45 degrees
Saw blade
Base
30 degrees
Base
P 8/ 13