Makita 5104 Manual page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Bearing Box, Gear Section with Super Joint System
DISASSEMBLY
3) Super joint system can be removed from Helical gear 39 as illustrated in Figs. 11 and 12.
Fig.11
1R045
Remove Spindle from Helical gear 39.
Fig.12
Turning Lock sleeve 27 with water pump pliers in the
direction to be loosened, pull off the Lock spring 27.
Then remove Lock spring 20 in the same way.
ASSEMBLY
Take the disassembling step in reverse.
Note: 1) Apply Makita Grease N.No.1 to the whole portion of Lock spring 20 and Lock spring 27.
2) When linking Safety cover with Blade case complete using Torsion spring 6, be sure to follow the instruction
shown in Fig. 13.
Fig.13
Hook Tension spring 6 from
Blade case complete side.
Helical gear 39
Lock sleeve
Spindle
Tension spring 6
Safety cover
Lock sleeve
Lock spring 27
Wrapping Lock sleeve and Helical gear 39 with
the cloth individually, twist and remove them.
Lock spring 27
Lock spring 20
Blade case complete
Cloth
Helical gear 39
water pump pliers
Helical gear 39
Blade cover
Hook Tension spring 6 from
Blade cover side.
P 7/ 13