Makita 5104 Manual page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLY
1) Base can be disassembled as illustrated in Figs. 2 and 3.
Fig.2
1. Loosen M6 Wing nut slightly; no need to remove in this step.
M4x5
H.S. Set screw
Fig.3
Depth guide
Flat washer 6
M6 Wing nut
Base
M6x25 Hex bolt
Remove M6 Wing nut and M6x25 Hex bolt which join Base
and Depth guide.
Remove Wing nut and M8x55 Hex bolt which join Angular
plate and Angular plate guide.
Now Base is separated.
2. Loosen M4x5 H.S. Set screw to
remove Pin 6 smoothly.
Angular plate guide
3. Remove Pin 6.
M8x55 Hex bolt
Flat washer 8
Wing nut
Angular plate guide
Base
5x20 Tapping screw (2pcs.)
Angular plate guide can be
removed from Base as illustrated
above.
P 3/ 13