Makita 5104 Manual page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. On-off Switch, Brake Switch, Power Supply Cord, Noise Supppressor, Controller
DISASSEMBLY
1) Disassemble Handle set (L) in the order of Figs. 4 and 5. The electrical Parts can be replaced.
Fig.4
Remove Ring spring 12 by pulling off
with Slotted screwdriver.
Fig.5
5x25 Tapping screw (4pcs.)
Handle set (L)
M5x40 Pan head screw (3pcs.)
Remove 5x25 Tapping screws and
M5x40 Pan head screws.
ASSEMBLY
After replacing the electrical parts, take the disassembling step in reverse. Refer to Figs. 5 and 4.
Ring spring 12
Remove Lever 54 by levering
up with Slotted screwdriver.
Lever 54
Handle set (R)
Controller
(5104S only)
Handle set (L)
Remove Handle set (L).
The electrical parts in Handle set (R) can be replaced;
no need to disassemble Motor section.
P 4/ 13
M8 Hex nut
Remove M8 Hex nut.
Brake switch
ON-OFF
switch
Noise suppressor
Power supply cord