Network Configuration; Tcp/Ip Configuration - GE Voluson P8 Basic Service Manual

GE DRAFT
DIRECTION 5775469, R
Section 3-12

Network Configuration

3-12-1

TCP/IP Configuration

NOTE: Following Information must be provided by customer or hospital engineer before you can start:
A Station name, AE Title, IP address and Port Number for the Voluson™ P8/Voluson™P6.
The IP addresses for the default gateway and other routers at the site for ROUTING INFORMATION.
Only if necessary (e.g. for Internet access).
1.) Press the UTILITIES key on the control console.
2.) In the "Utilities" menu select SETUP button to invoke the setup desktop on the screen.
3.) On the left side of the screen select CONNECTIVITY and then click the
4.) Click the button, read the message and confirm with YES.
3 DRAFT (J
EVISION
Figure 3-63 Network Configuration
Chapter 3 - Setup Instructions
19, 2018)
ULY
V ™ P8/V
OLUSON OLUSON
B S M
ASIC ERVICE ANUAL
tab.
DEVICE SETUP
™P6
3-71