Table of Contents
Advertisement
Safety Precautions
● Unstable location
-
Never place the Projector System on an
unstable surface or on a high shelf. Doing
so can cause it to fall, creating the risk of
personal injury.
● Using the Projector System on a base
with casters
Whenever using the Projector System on a base
that has casters, make sure that you lock the
casters when not moving the base.
● Lightening
During a lightening storm, do not touch the plug of
the Projector System power cord.
● Remote controller
!
Never try to take the remote controller
apart or modify it in any way. Doing so
creates the risk of electric shock, burn
injury, and other personal injury. Be sure
to leave all internal inspection,
adjustment, and repair up to your original
dealer or authorized CASIO service
center.
+
Never allow the remote controller to
become wet. Water creates the risk of fire
and electric shock.
*
Caution
● Power cord
-
Misuse of the power cord creates the risk
of fire and electric shock. Make sure that
you always observe the following
precautions.
• When unplugging the power cord, always grasp
the plug, and do not pull on the power cord.
• Insert the plug into the power outlet as far as it
will go.
• After using the Projector System, unplug it from
the power outlet.
• Unplug the Projector System from the power
outlet if you do not plan to use it for a long time.
• At least once a year, unplug the power plug and
use a dry cloth or vacuum cleaner to clear dust
from the area around the prongs of the power
plug.
• Never use detergent to clean the power cord,
especially the power plug and jack.
• Before moving the Projector System, be sure to
turn it off and unplug it from the power outlet
first.
● AC adapter
-
Misuse of the AC adapter creates the risk
of fire and electric shock. Make sure that
you always observe the following
precautions.
+
• Never cover the AC adapter with a
blanket while it is in use or locate it next
to a heater. Such conditions can interfere
with heat radiation, and cause heat to
build up in the area of the AC adapter.
• Never pull on the power cord when
unplugging the AC adapter. Grasp the
plug unit.
• Insert the plug into the power outlet as
far as it will go.
• Unplug the AC adapter before leaving on
a trip or otherwise leaving it unattended
for a long period.
• At least once a year, unplug the power
plug and use a dry cloth or vacuum
cleaner to clear dust from the area
around the prongs of the power plug.
• Never use detergent to clean the power
cord, especially the power plug and jack.
● Backup of important data
+
Be sure to keep separate written records
of all data stored in Control Box and/or
projector memory. Memory data can be
lost due to breakdown, maintenance, etc.
E-6
Advertisement
Table of Contents
