Casio Touchboards YA-S10 Setup Manual page 5

Geometric correction box
Hide thumbs Also See for Touchboards YA-S10:
Table of Contents

Advertisement

Safety Precautions
■ Projector System Operating Precautions
*
Warning
● Smoke, odor, heat, and other
abnormalities
-
Should you ever notice smoke, strange
odor, or any other abnormality,
immediately stop using the Projector
System. Continued use creates the risk
of fire and electric shock. Immediately
perform the following steps.
1.
Unplug the Projector System.
2.
Contact your original dealer or authorized
CASIO service center.
● Malfunction
-
Immediately stop using the Projector
System if the screen appears abnormal,
or if any other abnormal operation occurs
even though you are operating the
Projector System correctly. Continued
use creates the risk of fire and electric
shock. Immediately perform the following
steps.
1.
Turn off the Projector System.
2.
Unplug the Projector System.
3.
Contact your original dealer or authorized
CASIO service center.
● Power cord
+
Misuse of the power cord creates the risk
of fire and electric shock.
Make sure that you always observe the
following precautions.
• Be sure to use only the accessories that come
with the Projector System.
• Make sure that you use a power source with the
same voltage as that specified for the Projector
System.
• Do not overload a power outlet with too many
devices.
• Do not locate the power cord near a stove.
• Do not use the power cord that comes with the
Projector System with any other device.
• Do not share the outlet supplying power to the
Projector System with other devices. If you are
using an extension cord, make sure that the
ampere rating of the extension cord is
compatible with the power consumption value of
your Projector System.
• Never use the power cord while it is still bundled
together.
• Use a conveniently located power outlet that you
can reach easily when you need to unplug the
Projector System.
-
A damaged power cord creates the risk
of fire and electric shock.
Make sure that you always observe the
following precautions.
• Never place heavy objects on the power cord
and never expose it to heat.
• Make sure the power cord is not pinched
between the wall and the rack or table where the
Projector System is located, and never cover the
power cord with a cushion or other object.
• Never try to modify the power cord, allow it to
become damaged, or subject it to excessive
bending.
• Do not twist the power cord or pull on it.
"
Never touch the power cord or plug while
your hands are wet.
Doing so creates the risk of electric
shock.
• When using your Projector System in the country
where you purchased it, be sure to use the power
cord that came with it. Whenever using the
Projector System in another country, be sure to
purchase and use a power cord that is rated for
the voltage of that country. Also make sure that
you are aware of the Safety Standards that apply
in that country.
-
When going out, make sure the Projector
System is in a location away from pets
and other animals, and unplug the power
plug from the power outlet. A power cord
damaged by chewing can cause shorts,
and creates the risk of fire.
● AC adapter
+
Misuse of the AC adapter creates the risk
of fire and electric shock. Make sure that
you always observe the following
precautions.
-
• Use only the AC adapter that is specified
for the control box.
• Never try to use the supplied AC adapter
to power any other type of device.
• Make sure that you use a power source
with the same voltage as that specified
for the AC adapter.
-
• Do not overload a power outlet.
E-4

Advertisement

Table of Contents
loading

Table of Contents