Ya-S10 Overview; Unpacking - Casio Touchboards YA-S10 Setup Manual

The YA-S10 Control Box is a projector controller. Some of its major features and functions are described
below.
Image Shaping
A variety of different functions are provided to let you shape the projected image to suit the target
projection surface. Corrections can be made for images that appear normal on curved and other non-flat
surfaces.
Simultaneous Control of Two Projectors
The YA-S10 Control Box can control one or two projectors. When two projectors are connected, the
YA-S10 Control Box provides full simultaneous control of both of them. Operations for two projectors are
virtually the same as controlling a single projector.
Wired LAN and RS-232C Control Support
Some Control Box functions can be controlled from an external device (Crestron controller, computer,
etc.)

Unpacking

NOTE
If you have an XJ-SK600 or XJ-SK650 Projector System, refer to the "Unpacking" section in the
XJ-SK600 Setup Guide or the XJ-SK650 Setup Guide.
As you unpack the YA-S10, check to make sure that all of the items listed below are present.
Control Box
Remote controller (YT-200)
AC adapter
HDMI cables × 2

YA-S10 Overview

Power cord
Test batteries (AAA-size × 2)
Control Box Warranty Certificate
E-10