Operation - Makita UC002G Instruction Manual

5. Tighten the retaining nut to secure the sprocket
cover.
Fig.18
► 1 . Retaining nut

OPERATION

Lubrication
NOTICE:
When filling the chain oil for the first
time, or refilling the tank after it has been com-
pletely emptied, add oil up to the bottom edge of
the filler neck. The oil delivery may otherwise be
impaired.
NOTICE:
Use the saw chain oil exclusively for
Makita chain saws or equivalent oil available in
the market.
NOTICE:
Never use oil including dust and parti-
cles or volatile oil.
NOTICE:
When pruning trees, use botanical oil.
Mineral oil may harm trees.
NOTICE:
Before the cutting operation, make sure
that the provided oil tank cap is screwed in place.
Saw chain is automatically lubricated when the tool is in
operation. Check the amount of remaining oil in the oil
tank periodically through the oil inspection window.
2
Fig.19
► 1 . Oil tank cap 2. Oil inspection window
To refill the tank, lay the chain saw on its side, then
push the button on the oil tank cap so that the button on
the other side stands up, and then remove the oil tank
cap by turning it.
The proper amount of oil is 200 ml. After refilling the
tank, make sure that the oil tank cap is tightened
securely.
1
Fig.20
► 1 . Oil tank cap 2. Tighten 3. Loosen
NOTE: If it is difficult to remove the oil tank cap,
insert the box wrench into the slot of the oil tank
cap, and then remove the oil tank cap by turning it
counterclockwise.
1
Fig.21
► 1 . Slot 2. Box wrench
15 ENGLISH
1
2 3
1
2