Advertisement
DEVICE ACTIVATION INSTRUCTIONS
NOTE: Make sure your Wi-Fi and Bluetooth is connected.
1. Download the SmartSumpbyRIDGID App from your device's app store.
2. Open the SmartSumpbyRIDGID App and click "+ Add Device" to begin device activation.
3. Select your RIDGID® device.
4. Verify that the status LED on the device is blinking yellow. Click Next to continue.
5. Allow access to your devices camera and use your camera to scan the QR code located on the front of your device.
NOTE: Camera will automatically scan QR code when brought into view.
6. After the app "Finds" your device, a network list of local connections will be displayed. Select your network and enter your
password credentials. Click Send.
7. Once connected to Wi-Fi, your device will be registered.
8. The app will now ask for your zip code. By collecting your zip code, we can link your local weather data with your pump
data in the future.
INSTALLATION MANUAL
8
Advertisement
