Advertisement
USING YOUR DIGITAL CONTROLLER
MUTE ALARM:
Will silence alarm for 12 hours. For custom mutes times, open the companion app while the alarm is active and press
the alarm icon next to the alert pop-up.
SYSTEM TEST:
While your pump will automatically run periodic system tests; you can always force a system test via the controller or the
companion app. A complete System Test which analyzes all aspects of Pump Health will be performed at Water Level
2 or higher. A partial System Test may be initiated at Water Level 1 or lower but will not be able to analyze all aspects of
Pump Health.
REBOOT:
Will perform a Reboot of your device.
RESET WI-FI CONNECTION AND REBOOT:
Use this function to re-establish an existing or new connection to your device without losing any personalized settings or
data associated with your device.
NOTE: It is highly recommended that a Wi-Fi connection reset follow the direction on the app for resetting the Wi-Fi
connection for your device.
RESET TO FACTORY SETTINGS AND REBOOT:
NOTE: It is highly recommended that a Factory Reset be initiated from the device settings for your pump within the
companion app while the device is connected to Wi-Fi. A Factory Reset can be initiated from the app by navigating
to the setting for your pump and selecting "Deactivate Pump". Confirming will remove data for this pump from your
account and will prompt the Pump Controller to perform a Factory Reset and Reboot.
11
INSTALLATION MANUAL
Advertisement
