GE SENOGRAPHE DMR+ Technical Publications page 39

GE Medical Systems
REV1
2–5 Control Console
Note:
See Illustration 1–7
The Control Console is the interface between the Operator and the
SENOGRAPHE DMR. It provides two functions:
D
Receives operator commands.
D
Displays replies and/or machine messages.
The Control Console consists of:
1
The Control Console, which can be placed on a counter, on the Power Supply
Cabinet, or installed on the protective lead screen.
2
Connecting cable to generator.
3
Plug for remote handswitch.
4
Plug for connecting cable to generator.
The following optional moveable accessory is available for the Console:
5
Remote Handswitch for Rad Prep and Exposure.
To use the Control Console, refer to Section 3.
The symbol located on the control panel means that you must read the appropriate
chapter in the operator manual before taking any action.
1-21
SENOGRAPHE DMR+
om 5128689-2-100