Scanning; About The Job Function - Canon imageFORMULA DR-X10C User Manual

Scanning

Scanning operations can be controlled by a scanning application program such as the CapturePerfect 3.1 software included with the scanner, or
directly from the control panel of the DR-X10C, using the Job Function.
This section describes the Job Function and provides an overview of CapturePerfect 3.1.

About the Job Function

The Job Function enables you to use the Job Registration Tool to
register different jobs which can then be selected for scanning by
pressing the [Job] key on the control panel.
Job registration stores scanning condition settings, image file format
selection, save destination, and image data processing settings for
each job to be used with the Job Function.
Hint
The Job Registration Tool is a TWAIN-compliant application that is
installed along with the ISIS/TWAIN driver.
Executing Jobs
Use the following procedure to execute jobs that have been registered
by the Job Registration Tool.
1
Press the Job key on the control panel.
Registered jobs are displayed.
Hint
If no job is displayed, you must register a job using the Job
Registration Tool.
50
Job Key