Cleaning The Glass - Canon imageFORMULA DR-X10C User Manual

Cleaning the Glass

The scanner has two types of glass: the sensor glass for document
detection, and the scanning glass for actual scanning.
Hint
• The appearance of extraneous spots or streaks in scanned images
may indicate a dirty scanning glass.
• To clean the scanning glass, turn ON the lamp beneath the glass so
that any dust can be easily seen and wiped away.
IMPORTANT
Scratches on the scanning glass may cause spots or streaks on
scanned images, as well as feeding errors. If you find a scratch on
the scanning glass, contact your local authorized Canon dealer or
service representative to have the glass replaced.
Scanning Glass
Sensor Glass
1
Carefully raise the upper unit until it stops.
2
Press and hold the Start key on the control panel for
approximately two seconds.
The lamp beneath the scanning glass lights.
89
Start Key