Checking And Resetting The - Canon imageFORMULA DR-X10C User Manual

IMPORTANT
If you replace the transport rollers after installing the optional Thin
Paper Kit for DR-X10C, you need to use the Exchange Roller for DR-
X10C Thin Paper Kit (Product Code: 2418B013).
Before replacing the transport rollers, check the options that are
being used.
Pickup Roller
Feed Roller
Retard Roller
Checking and Resetting the Page
Counter
The roller usage counter can be checked and reset using the Roller
Counter User Mode setting.
IMPORTANT
• This counter shows the number of pages transported by the
currently installed feed rollers. Make sure to reset the counter when
you replace the rollers.
• The Total Counter shows the total number of pages fed over the life
of the scanner, and cannot be reset.
1
Press the Menu key on the control panel to activate the
User Mode.
2
Press the [ ] key twice to display [Roller Counter].
100
Menu Key