User Mode Functions - Canon imageFORMULA DR-X10C User Manual

User Mode Functions

The following functions are available in the User Mode.
Buzzer (Beeper) Control Setting
The beeper ("buzzer") sounds when you press the control panel keys
and when a scanning error occurs.
ON2: The beeper sounds when a scanner error occurs.
ON1: The beeper sounds when a scanner error occurs, and when a
control panel key is pressed.
OFF: The beeper never sounds.
Double-Feed Control Setting
Select whether double-feed detection is enabled when the Count-Only
mode is enabled. If you set DFD Control to [ON], double feeds are
detected during feeding in the Count-Only mode.
Detection Function" on p. 72.)
Double-Feed Retry Setting
When a double feed is detected with Ultrasonic double-feed detection,
the Double-Feed Retry function transports the double fed pages back
to the feeder inlet and tries scanning again.
• You can specify the number of times to retry. When double feeding
continues to be detected after retrying the specified number of
times, an error message is displayed and scanning stops after the
document is ejected at the eject outlet.
• Pre-imprinter printing is only available when the scanner's Double-
Feed Retry function is set to OFF.
Staple Detection Setting
(See "Double-Feed
Select whether staple detection is enabled when the Count-Only
mode is enabled.
ON: Detects staples in the Count-Only mode.
OFF: Does not detect staples in the Count-Only mode.
79
IMPORTANT
(See "Staple Detection Function" on p. 74.)